Telefonas
Darbo laikas
Pir- Pen 8:00 - 17:00

Šeš - Sek Nedirbame
Adresas
Perkūnkiemio g. 13-91

Vilnius
Gauti pasiūlymą!

EB1250 Magnetinės lenkimo staklės

EB1250 Magnetic Bending Machine

The fundamental principle of the Magnetic Bending Machine is that it uses electromagnetic, rather than mechanical, clamping system. The machine consists of a long electromagnet with a steel clamp bar located above it.
The sheet metal is clamped between the two by an electromagnet capable of clamping with a force range of between 3-10 tons. Rotating the bending beam then forms the bend.
The sheet is bent around the front edge of the clamping bar.
They have application in many ways with four various sets clamping bars.

Magnetic Bending Machine  with Magnetic clamping brake

2.Easy raise clamping car.

3.Unlimited box depth.

4.Include multiple finger lengths.

5.Bending stop included.

Aprašymas

Model EB625 EB1000 EB1250 EB2000 EB2500 EB3200
Max. Capacity
(length x thickness)
625×1.6mm 1000×1.6mm 1250×1.6mm 2000×1.6mm 2500×1.6mm 3200×1.2mm
2””x16ga 3””x16ga 4””x16ga 6””x16ga 8””x16ga 10””x18ga
Clamping force 3Ton 4.5Ton 6Ton 9Ton 12Ton 10Ton
Duty cycle 30% 30% 30% 30% 30% 30%
Back gauge 390mm 640mm 640mm 640mm 640mm 640mm
Foot switch NO Standard
Nominal current 4 Amp 6Amp 6Amp 12Amp 15Amp 15Amp
Protection Thermal cut-out 70°C
Bending-edge length 670 1050 1300 2090 2590 3290
Distance between lifters 630 1010 1260mm 2028 2528 3228
Packing size(cm) 83x112x38 120x112x38 145x112x38 220x112x38 270x112x38 340x112x38
N.W./G.W.(kg) 102/127 142/177 175/220 290/360 330/420 400/510